Bosch 1125290 4 Piece Kitchen Appliances Package with B20CS30SNS 36 Inch Side by Side Refrigerator, HGI8056UC 30 Inch Gas Range, HMV5053U 30 Inch Over the Range Microwave and SHPM65Z55N 24 Inch Built In Fully Integrated Dishwasher in Stainless Steel

User Manual - Page 22

For 1125290.

PDF File Manual, 104 pages, Read Online | Download pdf file

1125290 photo
Loading ...
Loading ...
Loading ...
English 19
Note:
The temperature range in Sabbath Mode is 100° F to
450° F.
The Sabbath Mode timer can be set between 0:01 and
74 hours.
To edit the Sabbath Temperature:
While editing the temperature in Sabbath mode, there is no
feedback from the control. If an invalid temperature is set,
the oven will default back to the previous running
temperature.
1. Press the Bake touchpad.
2. Enter the new desired set temperature.
3. Press Enter.
The oven will adjust its set temperature after a randomized
delay.
Panel Lock
Allows the user to disable all buttons on the control panel.
Panel Lock can only be enabled in stand by mode.
1. To enable Panel Lock, press and hold the Panel Lock
touchpad for 3 seconds (in stand by mode).
2. To disable Panel Lock, press and hold the Panel Lock
touchpad for 3 seconds. The display returns to stand
by mode.
Settings
The oven settings menu is used to customize certain
oven settings.
The oven must be in Stand by mode (no cooking mode or
timer running) in order to access the setup menu.
To make changes to Settings Menu Items:
1. Press the Settings touchpad.
2. The first setup item is displayed. The display shows
“SET CLOCK”. Press Settings again to access the
settings menu.
3. To display a different setup item, press the number
corresponding to that setting (see following table or
press the Settings touchpad to cycle through available
options).
4. To change the value for the displayed setting press the
Enter touchpad to enter the edit mode. Use the
numeric keypad to change the setting value. The
corresponding setting value is shown in the following
table.
For the temperature offset, with the item in edit mode,
press “-” or “+” first, then the numeric offset value.
The new value is automatically accepted as the display
reverts from edit mode back to display mode.
To exit the Settings menu:
Press the Clear On/Off touchpad.
Oven Temperature Offset
The oven is calibrated to provide accurate results. This
feature is useful if you prefer your foods lighter or darker.
When an offset temperature is selected, the actual oven
temperature is raised or lowered by this value.
The oven must be turned off in order to set an offset value.
Refer to “Temperature Offset” in “Settings Menu Options”
for setting.
Loading ...
Loading ...
Loading ...