Loading ...
Loading ...
Loading ...
36
4. Clean the funnel using any mild, non-abrasive, liquid detergent. Do Not use abrasives to clean as this can
damage the surface of the funnel. Rinse and Dry.
5. To reinstall the funnel, tip the top edge of the
funnel under the coffee chute, and place the metal
pins on the flat springs. Push down and toward
the rear of the machine to snap the funnel into
the funnel arms (Figure 17).
Figure 17
Care and Cleaning - Weekly Cleaning continued
6. Reconnect the rubber hose by sliding it over
the funnel inlet fitting. The hose must be fully
engaged on the fitting (Figure 18).
Figure 18
Rear of funnel
engaged under
coffee chute
Funnel pins on
flat spring
7. Close the front door to resume normal operation.
Engage funnel
hose fully on
inlet fitting
53058.0 050117
Loading ...