Loading ...
Loading ...
Loading ...
18
■ Cleaning the filters of the water tank and ice tank ■
5. Clean the gap of the nozzle frame fixed
on the vessel sheet (water tank).
6. Lift the drain projectile inside the vessel
sheet (water tank), clean it, and drain
the water.
* Make sure that the drain projectile is
assembled back in the correct position after
cleaning; otherwise, draining will not stop,
with the product rendered unable to make
ice cubes.
1. Empty the ice tank and prepare a cleaning
solution by distilling 30g of neutral
dishwashing detergent with 8L of warm water
(35~45℃). Soak a clean cloth in the solution
and clear the inside of the ice tank.
Pour an appropriate amount of the solution
into the draining pipe, and then wait until
it dries naturally.
* Press the switch to set it to “Ⅱ”(WASH) when cleaning the product;
this will repeat the process of supplying water for about 2 minutes and operating
the circulation pump 3 times, enabling easier cleaning.
Cleaning the nozzle / ice slide / water tank
- Cleaning at least once a month after turning off power
For your
information
Loading ...
Loading ...
Loading ...