Loading ...
Loading ...
Loading ...
12
Changing Door-opening Method
The direction in which the door fixed with hinges opens may be changed.
The hinges are attached to the right-hand side of the door when the product is shipped
from the factory.
However, the ice maker is designed so that the hinges may be installed on either side.
If the hinges are moved to the holes on the left-hand side, the door will open to the left.
① Loosen the anchor
screws on the lower
hinge of the door
and separate the door.
④ After removing the fixture top
hinge on the right, move it to
the left and fasten the screws
as shown in the above figure.
⑦ After moving the upper door hinge to the left and inserting
it into the hole on the front door, fix it in the hole on the upper
cover and fasten the screws(two parts).
⑧ Check the movement of the door by opening and closing it.
② Loosen the anchor screws
on the lower hinge and
insert the hinge into the hole
on the left.
⑤ Place the upper cover
again and fasten the
screws. (three parts on
the back panel)
③ Release the screws
to remove the upper
door hinge and
upper cover.
⑥ Move the “L” shaped
door hinges of the
upper and lower
parts of the door
to the left.
5. Installation of the Product
Upper door hinge
Upper door hinge
TOP COVER
Loading ...
Loading ...
Loading ...