Loading ...
Loading ...
Loading ...
19 ENGLISH
Using the trimmer base with the
oset base plate and grip
The oset base plate can also be used with a trimmer
base and a grip attachment (optional accessory) for
more stability.
1. Loosen the screws on the base plate, then remove
the base plate from the oset base.
12
► 1. Oset base plate 2. Trimmer base plate
2. Attach the oset base plate to the trimmer base by
tightening the screws.
3. Attach the grip attachment and the bar type grip to
the oset base plate by tightening the screws.
2
1
► 1. Bar type grip 2. Grip attachment
The knob type grip removed from the plunge base can
be installed on the oset base instead of the bar type grip.
1
2
► 1. Screw 2. Knob type grip
Using the tool with the plunge base
Always hold the grips rmly with both hands during opera-
tion. Operate the tool in the same way as the trimmer base.
Using the straight guide
Optional accessory
1.
Install the straight guide to the guide holder by
tightening the wing nut. Insert the guide holder into the
holes in the plunge base, and then tighten the wing bolts.
1
2
3
4
►
1. Wing bolt 2. Guide holder 3. Wing nut 4. Straight guide
2. Loosen the wing nut on the straight guide and
adjust the distance between the bit and the straight
guide. At the desired distance, tighten the wing nut.
1
► 1. Wing nut
Loading ...
Loading ...
Loading ...