Loading ...
Loading ...
Loading ...
11 ENGLISH
Installing or removing the trimmer
base
1. Open the lock lever of the trimmer base, then
insert the tool into the trimmer base aligning the groove
on the tool with the protrusion on the trimmer base.
1
► 1. Lock lever
NOTE: You can use the trimmer base (resin) as an
optional accessory as shown in the gure. When
using the trimmer base (resin), loosen or tighten the
thumb nut instead of opening or closing the lock lever.
1
► 1. Thumb nut
2. Close the lock lever.
3. Attach the dust nozzle to the trimmer base, and
then tighten the thumb screw.
1
2
► 1. Dust nozzle 2. Thumb screw
To remove the base, follow the installation procedure
in reverse.
CAUTION: When using the tool with the trim-
mer base, be sure to install the dust nozzle on the
trimmer base.
NOTE: In some countries, the dust nozzle may not be
included in the tool package as standard accessory.
Loading ...
Loading ...
Loading ...