Loading ...
Loading ...
Loading ...
![](https://files.manualsfile.com/25167264-drt50/bgd.png)
13 ENGLISH
5. Open the lock lever of the oset base, then insert
the tool into the oset base.
1
► 1. Lock lever
6. Mount the belt to the pulley by rotating the belt
manually.
2
1
► 1. Pulley 2. Belt
7. Close the lock lever.
1
► 1. Lock lever
8. Attach the base plate by tightening the screws.
1
► 1. Base plate
9. Insert the collet cone and the trimmer bit into the
oset base, and then tighten the collet nut.
1
2
3
► 1. Trimmer bit 2. Collet nut 3. Collet cone
10. Insert the hex wrench into the hole of the oset
base, and then tighten the collet nut with the wrench.
1
2
3
► 1. Collet nut 2. Wrench 3. Hex wrench
To remove the base, follow the installation procedure
in reverse.
Loading ...
Loading ...
Loading ...