Loading ...
Loading ...
Loading ...
en Additional programme settings
16
Ready in ð
(“Ready in” time)
When you select the programme, the
relevant programme duration is
displayed.
The programme duration is
automatically adjusted when the
programme is running. Changes to the
programme default settings or
programme settings also change the
programme duration.
Before starting the programme, the
programme end ("Ready in" time) can
be preselected in increments of one
hour (h = hours) up to a maximum of 24
hours.
To do this, repeatedly select the
corresponding button until the required
setting is displayed.
Note: The programme duration is
included in the selected "Ready in" time.
After the start, the preselected time e.g.
8 h is displayed and the time counts
down to the start of the wash
programme. The programme duration is
then displayed, e.g. 2:30
(hours:minutes).
Changing the preselected time:
You can change the preselected time
after the start of the programme as
follows:
1. Press Start/Reload A .
2. Press the Ready in ð button
repeatedly until the required number
of hours is displayed.
3. Press the Start/Reload A button.
Adding laundry while the preselected
time continues running:
1. Press Start/Reload A .
2. The symbols YES and ¼ light up on
the display panel. The washing
machine door can be opened and
laundry can be added.
3. Close the washing machine door.
4. Press the Start/Reload A button.
The preselected time continues to
run.
\ Additional programme
settings
Additional programme settings
SpeedPerfect G
For washing in a shorter time with a
washing result comparable to that of the
standard programme.
Notes
■ Do not exceed the maximum load.
Overview of programmes
~ Page 13
■ SpeedPerfect G is preset by
default. To deactivate this additional
default setting, press the
SpeedPerfect G button. The
indicator light goes off.
Rinse Plus Z
Extra rinse. For areas with very soft
water or for an even better rinsing
result.
Loading ...
Loading ...
Loading ...