Loading ...
Loading ...
Loading ...
Programme default settings en
15
Starching
Note: Laundry shall not be treated with
fabric softener.
Starching is possible in all wash
programmes if liquid starch is used.
Measure starch into compartment M in
accordance with the manufacturer's
instructions (clean first if necessary).
Dyeing/bleaching
Dye should only be used in normal
household quantities. Salt may damage
stainless steel. Always follow the dye
manufacturer's instructions.
Do not use the washing machine to
bleach clothes.
Soaking
1. Pour soaking agent/detergent into
compartment II in accordance with
the manufacturer's instructions.
2. Select desired programme.
3. Press Start/Reload A .
4. After approx. ten minutes, press
Start/Reload A .
5. After the required soaking time,
press Start/Reload A again to
continue or change the programme.
Notes
■ Load laundry of the same colour.
■ No additional detergent is required;
the soaking solution is used for
washing.
0 Programme default
settings
Programme default settings
The spin speed and programme
duration ("Ready in" time) for all
programmes are preset at the factory.
These are displayed in the display panel
after selecting the programme.
You can change the default settings as
follows.
rpm 0
(Spin speed)
Depending on the programme
progress, you can change the spin
speed (in rpm; rotations per minute)
before and during the programme.
To do this, repeatedly select the
corresponding button until the required
setting is displayed.
Setting – – – 0 : Rinse hold = without
final spin, the laundry remains in the
water after the final rinse.
You can select "Rinse hold" to prevent
creasing if the laundry will not be taken
out of the washing machine immediately
after the programme has ended.
The maximum speed that can be set
depends on the model and programme
that have been selected.
Overview of programmes ~ Page 13
Rinse/Freshen up O
Extra rinse with spin
-
-
– – – ... 800 ... 1200** rpm
Z
Programme/type of laundry/information Settings/Presettings of the pro-
grammes are highlighted in bold
Loading ...
Loading ...
Loading ...