Loading ...
Loading ...
Loading ...
18_ setting up
INSTALLATION REQUIREMENTS
The installation location you choose must meet the
requirements listed in this section.
Selecting an installation place
•Check the refrigerator’s dimensions in the table
below before you begin to install it and confirm
it can clear all the doors on its way to the
installation location.
- If the refrigerator cannot clear the doors, you
cannot install it.
Front and side dimensions
(inches)
Model A B C D E
RS27FDBTNSR/*
48”
(1219 mm)
28.5
(724 mm)
82
(2083mm)
92.1
(2340mm)
85.9
(2182mm)
Door 90º Open Door 130º Open
Dimensions with doors open
(inches)
Model A B C D E F
RS27FDBTNSR/*
44.5
(1129mm)
52.5
(1333mm)
40.6
(1032mm)
14.4
(365mm)
20.1
(510mm)
46.3
(1176mm)
•Allow sufficient space on
the right, left, back, and
top for air circulation.
- If there is not enough
space, you cannot install
the refrigerator.
Location of
Electrical
Receptacle
Water Supply
Opening (20x20)
Enclosure dimensions
(inches)
Model A B C
RS27FDBTNSR/*
48
(1219mm)
27.6
(701mm)
83.5 Min,
84.3 Max
(2121mm Min,
2141mm Max)
•Confirm that the floor is flat.
- If the refrigerator is installed on
an uneven floor, it will cause
vibration and noise.
•Confirm that the floor can
support the weight of the
refrigerator and the food inside
(1102.3lb (500kg) total).
•Confirm that the refrigerator will
be within reach of a grounded
wall outlet.
•If the refrigerator is a dispenser
model, confirm that it will be
within easy reach of a water
supply and that the humidity in
the location is low.
- The refrigerator needs easy
access to a water supply for the
water and ice dispensers.
Setting up your side-by-side
refrigerator
DA68-02935A-08.indb 18 2016. 3. 31. 11:51
Loading ...
Loading ...
Loading ...