Loading ...
Loading ...
Loading ...
7
ninjakitchen. co.uk
6
ninjakitchen. co.uk
SAVE THESE INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
PLEASE READ CAREFULLY BEFORE USE • FOR HOUSEHOLD USE ONLY
WARNING
To reduce the risk of injury, fire, electrical shock or property damage,
basic safety precautions must always be followed, including the following
numbered warnings and subsequent instructions� Do not use appliance for
other than intended use�
33 NEVER operate the appliance without
lids and caps in place. DO NOT attempt
to defeat the interlock mechanism.
Ensure the container and lid are properly
installed before operation.
34 Before operation, ensure all utensils are
removed from containers. Failure to
remove utensils can cause containers to
shatter and potentially result in personal
injury and property damage.
35 Keep hands and utensils out of
containers while chopping to reduce the
risk of severe personal injury or damage
to the blender/food chopper. A scraper
may be used ONLY when the blender
or processor is not running. When using
the processor, always use food pusher to
add food. NEVER add food by hand.
36 If you find unmixed ingredients sticking to
the sides of the cup, stop the appliance,
remove the blade assembly, and use a
scraper to dislodge ingredients.
37 DO NOT
open the Jug’s pour spout cap
while blender is operating.
38 If you find unmixed ingredients sticking
to the sides of the Jug, stop the
appliance, remove the lid, and use a
spatula to dislodge ingredients. NEVER
insert your hands into the Jug, as you
may contact one of the blades and
experience a laceration.
39 DO NOT attempt to remove the
container or lid from the motor base
while the blade assembly is still spinning.
Allow the appliance to come to a
complete stop before removing lids and
containers.
40 If the appliance overheats, a thermal
switch will activate and temporarily
disable the motor. To reset, unplug
the appliance and allow it to cool
for approximately 30 minutes before
using again.
41 DO NOT expose the containers and
accessories to extreme temperature
changes. They may experience damage.
42 Upon completion of processing, ensure
the blade assembly is removed BEFORE
emptying container’s contents. Remove
the blade assembly by carefully grasping
the top of the shaft and lifting it from
the container. Failure to remove the
blade assembly before emptying the
container results in a risk of laceration.
43 If using the Jug’s pour spout, hold the
cover in place on the container or ensure
lid lock is engaged when pouring to
avoid risk of injury.
44 Remove the Pro Extractor Blades
®
Assembly from the Single-Serve Cup
upon completion of blending. DO
NOT store ingredients before or after
blending them in the cup with the blade
assembly attached. Some foods may
contain active ingredients or release
gases that will expand if left in a sealed
container, resulting in excessive pressure
buildup that can pose a risk of injury. For
ingredient storage in the cup, use only
Spout Lid to cover.
45 The maximum wattage rating for this
appliance is based on the configuration of
the Pro Extractor Blades® Assembly and
Single-Serve Cup. Other configurations
may draw less power or current.
46 DO NOT submerge the motor base or
control panel in water or other liquids.
DO NOT spray motor base or control
panel with any liquid.
47 DO NOT attempt to sharpen blades.
48 Turn o the appliance and unplug the
motor base before cleaning.
Indicates to read and review instructions to understand operation and use of product.
Indicates the presence of a hazard that can cause personal injury, death or
substantial property damage if the warning included with this symbol is ignored.
Take care to avoid contact with hot surface. Always use hand protection to
avoid burns.
For indoor and household use only.
Loading ...
Loading ...
Loading ...