Loading ...
Loading ...
Loading ...
ActionPossible causesProblem
See the chapter Settings.Incorrect rinse aid dosage setting.Spots or films on the dishes.
Wash crystal at a low temperature and
with a conservative amount of detergent.
Contact the detergent manufacturer.
Too high temperature and/or too much
detergent can cause etching on crystal.
Unfortunately, this cannot be repaired,
only prevented.
Reduce the amount. See the sections
Before washing for the first time and
Settings. If you have very soft water, you
may want to dilute the rinse aid 50:50
with water.
Rinse aid dosage setting too high.The dishes have a sticky white/blue film.
Use a detergent with a bleaching agent.Lipstick and tea can be difficult to wash
off.
Spots left after washing.
Check that the dishes are placed secure-
ly. Spin the spray arms to make sure
they can rotate.
The dishes are not correctly placed or
the spray arms are not rotating.
Rattling sound when dishwashing.
See the chapter Settings.The ION setting is activated.The sound of a fan is heard even when
no dishwashing program is running.
None, next time the program is run the
corrected time will be displayed.
The program is taking longer than esti-
mated.
1 minute appears in the display.
Loosen the drainage hose where it con-
nects to the sink unit's water trap. Check
that no debris has fastened. Is the cone-
shaped part of the pipe cut to an inner
diameter of at least 14 mm?
Blocked drainage hose.Water remains in the dishwasher.
Check that the hose is free from kinks
and sharp bends.
Kink in drainage hose.
Clean the coarse and fine filters.The filters are blocked.
Ensure filter is completely locked with
handle pointing towards the door.
The filter is not locked in completely.
Clean the drainage pump. See the
chapter Care and cleaning.
Debris in the drainage pump.
Clean with washing-up brush and low
foaming cleaner.
Dirt around the seals and in corners.Bad odour in dishwasher.
Run a program with a higher tempera-
ture about once a month.
Low temperature programs have been
selected for a prolonged period.
Activate the ION setting. See the chapter
Settings.
Dirty dishes have been left in the dish-
washer for some time.
Deactivate the ION setting. See the
chapter Settings.
The ION setting has been activated in a
confined space with inadequate ventila-
tion.
Bad odour outside the dishwasher.
Activate the Auto open option.The Auto open option is not activated.The dishes are not dry enough.
Fully load the dishwasher.The dishwasher is not fully loaded.
Top up with rinse aid or increase the
rinse aid dosage. See the sections Be-
fore washing for the first time and Set-
tings.
Rinse aid needs topping up or dosage
is set too low.
14
Loading ...
Loading ...
Loading ...