Loading ...
Loading ...
Loading ...
Spray arms
Holes and bearings can sometimes become blocked. Re-
move any debris using a pin or something similar. The spray
arms also have holes on their undersides.
To facilitate cleaning, you can remove the spray arms. Re-
member to fit them firmly back into place after cleaning.
Lower spray arm
•
Pull the lower spray arm straight up to release it.
Upper spray arm
1
Pull out the upper basket.
2
Unscrew the spray arm bearings counterclockwise to
remove the spray arm from the upper basket.
Door
When cleaning the edge around the door, use only a
slightly damp cloth (with a little cleaner if necessary).
Limescale deposits
The dishwasher tub is made of stainless steel and is kept
clean through normal use. If the water is hard in your loca-
tion, limescale deposits may build up in the dishwasher. If
this happens, run a self-cleaning program with two table-
spoons of citric acid in the detergent compartment (with no
dishes in the machine). The chapter Settings describes how
to activate the Self Cleaning Program setting.
Front panel
Keep the buttons clean and free from grease. Wipe them
clean with a dry or slightly damp cloth. Never use cleaners
– they can scratch the surface. Use the main power switch
to turn off the dishwasher before cleaning the buttons to
avoid activating any buttons unintentionally.
11
Loading ...
Loading ...
Loading ...