Loading ...
Loading ...
Loading ...
5.4 CONNECTION TO THE POWER SUPPLY
NOTE: We recommend that the battery is disconnected from the vehicle. This will avoid any
possible damage to the alternator. The loss of codes for audio and security systems can be
avoided by connecting a Draper Memory Saver (Part No.SMS, Stock No.22277 12V socket type or
Part No.EMS, Stock No.22231 EOBD TYPE) before disconnecting the battery. Check that the
battery voltage matches that of the charger.
Before connecting the battery charger to the battery ensure that the charger and battery are on a
level surface. If the battery has cell filler caps, loosen or remove them to assist the escape of
charging gases.
If the battery to be charged is maintenance type, see section 8.1.
i. Adjust the12V/24V positive cable so that it is connected to the thread pillar
connection that is correct for the battery you will charge.
ii. Connect the red positive cable (+) to the positive (+) terminal on your battery.
iii. Connect the black negative lead (-) to the negative (-) terminal on your battery.
CAUTION! Double check the polarity connection before proceeding. Incorrectly setting 24V for a
12V battery will result in damage.
5. HEALTH AND SAFETY INFORMATION
- 9 -
Loading ...
Loading ...
Loading ...