Loading ...
Loading ...
Loading ...
English 57
Troubleshooting
Problem Action
UC
The electronic control needs to be checked (Over Voltage Error).
•Check the PCB and wire harness.
•Check if power is supplied properly.
•If the information code remains, contact a customer service
centre.
Low voltage detected
•Check if the power cord is plugged in.
•If the information code remains, contact a customer service
centre.
HC
High temperature heating check
•If the information code remains, contact a customer service
centre.
1C
The WaterLevel sensor is not working properly.
•Try power off and restarting the cycle.
•Check WaterLevel Sensor wire harness.
•If the information code remains, contact a customer service
centre.
NOTE
When the washer displays the “1C” code, the washer do
draining for 3 minutes. During this time, the Power button is
inoperative.
8C
The MEMS sensor is not working properly.
•Turn the machine off, and restart the cycle.
•If the information code remains, contact a customer service
centre.
AC
Check communications between main and sub PBAs.
•Try power off and restarting the cycle.
•If the information code remains, contact a customer service
centre.
AC6
Check communications between main and inverter PBAs.
•Depending on the state, the machine may automatically returns
to normal operation.
•Turn the machine off, and restart the cycle.
•If the information code remains, contact a customer service
centre.
WD80K5410OS_03744N-07_EN(9kg).indd 57 2020/3/5 9:14:02
Loading ...
Loading ...
Loading ...