Samsung WD80K5410OS/GU WD80K5410OS Combo Washing Machine with AddWash, 8 kg

User Manual - Page 53

For WD80K5410OS/GU. Also, The document are for others Samsung models: WD80K5410OS

PDF File Manual, 122 pages, Read Online | Download pdf file

WD80K5410OS/GU photo
Loading ...
Loading ...
Loading ...
English 53
Troubleshooting
Problem Action
Stops.
•Plug the power cord into a live electrical outlet.
•Check the fuse or reset the circuit breaker.
•Close the door and press or tap Start/Pause to start the
washing machine.
For your safety, the washing machine will not tumble or spin
unless the door is closed.
•Before the washing machine starts to ll, it will make a series
of clicking noises to check the door lock and does a quick
drain.
•There may be a pause or soak period in the cycle. Wait briey
and the washing machine may start.
•Make sure the mesh lter of the water supply hose at the
water taps are not clogged. Periodically clean the mesh lter.
•If the washing machine is not supplied with sufcient power,
the washing machine temporarily will not drain or spin. As
soon as the washing machine regains sufcient power, it will
operate normally.
Fills with the wrong
water temperature.
•Fully open both taps.
•Make sure the temperature selection is correct.
•Make sure the hoses are connected to the correct taps. Flush
water lines.
•Make sure the water heater is set to supply a minimum
120 °F (49 °C) hot water at the tap. Also, check the water
heater capacity and recovery rate.
•Disconnect the hoses and clean the mesh lter. The mesh lter
may be clogged.
•While the washing machine lls, the water temperature may
change as the automatic temperature control feature checks
incoming water temperature. This is normal.
•While the washing machine lls, you may notice just hot and/
or just cold water going through the dispenser when cold or
warm temperatures are selected.
This is a normal function of the automatic temperature
control feature as the washing machine determines the water
temperature.
Load is wet at the
end of a cycle.
•Use the High or Extra High spin speed.
•Use high efciency (HE) detergent to reduce oversudsing.
•Load is too small. Small loads (one or two items) may become
unbalanced and not spin completely.
•Make sure the drain hose is not kinked or clogged.
WD80K5410OS_03744N-07_EN(9kg).indd 53 2020/3/5 9:14:01
Loading ...
Loading ...
Loading ...