Loading ...
Loading ...
Loading ...
6. Toreplacegreasefilters,slidefilterintheframe
sloton onesideoftheopening.Pushfilterupward
and push to the other side to lock into place.
2. Remove the two vent grille mounting screws
iocated above the cover (the two outer screws).
7. Slide the bottom of the vent gdlle into place. Push
the top until it snaps into place. Replace the
mounting screws.
8. Plug in microwave oven or reconnect power.
NOTE: Do not operate the hood without the grease
filters in place.
1. Unplug microwave oven or disconnect power.
2. Remove the bulb cover mounting screws.
3. Tip the grille forward, then lift out to remove.
I I
4. Lift up the bulb holder.
3. We recommend replacing bulb(s) with candelabra z
base 30owatt bulb(s) (PN 4393681 ) available from
your designated service company, or by calling the
Customer Interaction Center at 1-800-253-1301. Make
sure to have your model number when ordering.
4. Plug in microwave oven or reconnect power.
i
1. Plug in microwave oven or reconnect power.
5. Replace the bulb with a candelabra-base
30-watt bulb (PN 4393681) available from your
authorized Whirlpool dealer.
6. Close the bulb cover.
7. Slide the top of the vent grille into place. Push
the bottom until it snaps into place. Replace the
mounting screws.
I
8. Hug in microwave oven or reconnect power.
37
Loading ...
Loading ...
Loading ...