Loading ...
Loading ...
Loading ...
Self-Cleaning Oven
Wall Oven
How to
delay the
start o/
cleaning
You can set the oven to delay the start of
clemling, clean for a selected length of time
mad turn off automatically. On double oven
models, you will not be able to set a timed
cooking or cleaning flmction in both ovens at
tile same time
NOTE: Before beginning, make sure tile clock
shows tile correct time of day.
O
@
O
O
O
Turn tile Mode Selector Knob to TIMED
(on double oven models, select UPPER
TIMED or I,OWER TIMED, depending on
the oven you are cleaning).
Turn tile Oven Control Knob to SEI,F
CI,EAN.
Tm'n tile Temperature Control Knob
to CI,EAN.
Press tile START TIME button.
Press tile increase "at" or decrease "V"
button to set tile time of day wm want tile
oven to turn on and start cleaning.
If the increase "at" or decrease "V" button
is not pressed within 5 seconds of pressing
the START TIME button, you will need to
press START TIME again.
Clean time is normally 3 horn's. You can
change tile clean time to any time between
2 and 4 hours, depending on tile all/O/int of
soil iI1 VO/II" oven.
If your oxen is connected to a 208V electrical
supply, we recommend that you set _our clean
time fl>r 4 hours.
Press tile COOK TIME button if a time
other than 3 hom_ is needed.
Press tile increase "at" or decrease "V"
button to set tile cleaning time.
If the increase "at" or decrease "V" button
is not pressed within 5 seconds of pressing
the COOK TIME button, you will need to
press COOK TIME again.
The display will return to the time of dav
and show the word DELAY. When the start
time is reached, the display will show the word
CI,EAN and the clean time remaining.
As tile oven heats to tile clean temperature,
the door will lock automatically. The locked
door, HEATING and OVEN ON indicator
lights mrn on.
At*er tile clean cycle is complete, tile oven
has cooled and the locked door indicator
light is off, turn the Oven Control Knobs to
OFF and the Mode Selector Knob to
NORMAl,.
IMPORTANT: It will be necessary to grease
all rack side edges with a light coating of
vegetable oil after clemahlg them by hand
or in the oven. This will help maintain tile ease
of sliding tile racks in and out of tile oven.
If white spots remain, remove them with
warm sudsv water and rinse thoroughly with a
vinegar and water mixture. These deposits are
usually a salt residue that cannot be removed
by the clean cycle.
If the oven is not clem_ after one clem_ cycle,
repeat tile cycle.
You may notice some white ash in the oven.
_¥ipe it up with a damp ch>th after tile
o_,en cools.
28
Loading ...
Loading ...
Loading ...