Loading ...
Loading ...
Loading ...
—Replacement of Filter Cartridges
Periodic replacement of your Billi Quadra’s
Water Filter Cartridges is necessary to
maintain the sparkling cleanliness and
purity of your drinking water.
A replacement filter change service is
available. To arrange, contact the Billi
Service centre on 1800 812 321.
If you wish to install the replacement filter
cartridges yourself, filters can be purchased
online at www.billi.com.au or through a
certified agent which will provide genuine
Billi replacement filter cartridge sets.
To assist with the replacement of your Quadra
filter cartridge, a series of moving graphic
instruction screens will guide you through the
required steps. Press HELP if display indicates
‘Filter Change Due’ or refer to Options, page 10
mode to select ‘Filter Change Help’.
Once the new filter has been installed and
the filter flush cycle is complete, check for
any water leakage around the filter system.
Take particular care to ensure the area around
the water leakage sensor, located on the
lower left hand side of the bulkhead behind
the filters, is dry. If you have any questions,
or concerns during the filter change process
simply contact Billi’s experienced technical
assistance team on 1800 812 321.
8
User guide
Billi Quadra & Quadra Plus – XL, XT, XR.
Filter
Type
Order
Part No. Micr. Filters Sediment Chlorine VOCs Chemicals Taste Odour
Fluoride
Minerals
Expected
Life
Prem. 994002 0.2 Single
Slight
6 - 12
months
Stand. 994001 5.0 Single
6 - 12
months
—Filter Change Due Monitor
The Quadra filter change due monitor
operates by counting the number of cups
dispensed and the number of days elapsed
until a pre-set level is reached. Once
reached, the dispenser icons will briefly
change to orange once every five seconds.
The Quadra will continue to operate while the
filter indicator is flashing. Water filters
installed in areas with higher levels of
turbidity
(cloudiness/sediment) will experience
a reduced service life. The flow from the cold
water outlet will decrease as the filters
become blocked. It may be necessary to
change filters before the change filter
indicator flashes. The filter monitor can
be reprogrammed to an appropriate service
interval if required. Contact Billi Australia Pty
Ltd.
Standard 5 micron-rated filters generally
have a longer service life than Premium sub
micron-rated filters.
If particularly dirty water is noticed coming
through the water supply, e.g. from other tap
ware, as sometimes occurs following repairs
to local water mains, immediately turn your
Billi Quadra off using the ON/OFF button.
This will help prevent premature blocking of
the filter cartridges.
Billi Filter Cartridges – Reduces & Removal
Loading ...
Loading ...
Loading ...