Loading ...
Loading ...
Loading ...
7
User guide
Billi Quadra & Quadra Plus – XL, XT, XR.
Setting time switch
Screen shows active and non-active days.
Turn-on and Turn-o times for active days
are displayed.
– Press
or buttons to move the
highlighted cursor.
– Press
SELECT to activate. The highlighted
item flashes.
– When flashing, press or to change setting.
– Press
SELECT to confirm and advance
to next setting. Repeat above activation
procedure.
– Press
BACK twice to return to
normal display.
Options
The screen displays the following options and
settings. Press
and buttons to select
and activate or alter the required setting.
– Safety Switch: Childproof safety switch
is activated by selecting ON.
– Hot Temp Set: Hot water temperature can
be set between 80°C and 98.9°C.
– Cold Temp Set: Cold water temperature
can be set between 6°C and 20°C.
– Standby Mode: Activated by selecting ON.
– Standby Time Set: Period of non-use
before standby mode is activated.
Range 0.5 to 4.0 hours.
– Filter Change Help: Step-by-step graphic
instructions showing filter change procedure.
– Filter Flush: Automatic flush cycle to clean
filters after 2 days of non-use.
Statistics
Screen displays information only.
– Hot, Cold: Temperature of boiling and
chilled water.
– Hot Cups: Total number of boiling water
cups dispensed.
– Cold Cups: Total number of cold water
cups dispensed.
– Filter Life Remaining: No. of cups or days
to go before change filter warning flashes.
– Cups this filter: Cups current filter has
dispensed.
– Start: Date unit began to be used.
– S/W: Software version installed.
Initial Setup
For use only by the installer when setting
initial operating parameters.
Billi Filter Cartridges
All Billi Quadra models feature the Billi
swing-change filtration system. The Quadra
is fitted with a single filter. The filters use
Fibredyne™ technology which is fibrous
and matted together, increasing the surface
area of the carbon, meaning there is greater
contact time and improved quality of filtration.
It incorporates five stage filtration, removing
sediment and chemical elements as well as
enabling minerals to flow though the appliance
without allowing scale build up and arresting
the growth of bacterial microorganisms such
as giardia and cryptosporidium.
Use only genuine filters as designed for this
system. All drinking water filtration systems
should be flushed after a period of non-use.
Your Billi Quadra has an automatic flushing
cycle which can be activated. Refer to Options
above. After a period of non-use of more
than two days, e.g. o Saturday and Sunday,
the cold water will flow for 90 seconds
when the time switch first turns the unit on.
Alternatively, before use, flush and run until
water flow stops, then release the lever.
*(subject to water quality).
Loading ...
Loading ...
Loading ...