Loading ...
Loading ...
Loading ...
English
Maintenance
English46
4. Use pliers to pull out the mesh filter from the inlet
valves.
5. Thoroughly clean the mesh filters in water.
6. Completely dry the mesh filters. Do not dry in direct
sunlight.
7. Reinsert the mesh filters, and then reconnect the
water hoses.
8. Open the water taps.
NOTE
• If a mesh filter is clogged, the “4C” information code appears on the washer’s display screen.
• The mesh filter of the water hose may require more frequent cleaning if the water supply utilizes well
water, hard water, or aged pipes.
Pump filter
You should clean the pump filter 5 or 6 times a year to prevent it from clogging. A clogged pump filter may
reduce the bubble effect.
1. Turn off the washer, and then unplug the power cord.
2. Gently press the top area of the filter cover to open.
3. Drain the remaining water inside the drum. See the
Emergency drain section on page 44.
4. Turn the pump filter knob (A) counterclockwise, and
then drain the remaining water.
5. Clean the pump filter using a soft brush. Make
sure the drain pump impeller inside the filter is not
clogged.
6. Reinsert the pump filter, and then turn the filter
knob clockwise.
7. Close the filter cover.
Untitled-5 46 2022-01-20 5:06:27
Loading ...
Loading ...
Loading ...