Loading ...
Loading ...
Loading ...
(352,1)
北米Model "A1490BE-A" EDITED: 2022/ 2/ 15
WARNING
Depress the brake pedal immedi-
ately after the system stops the
vehicle by automatic braking. De-
pending on the conditions of the
road surface and tires, the vehicle
may not remain stopped, possibly
leading to an unexpected accident.
! After the vehicle is stopped by the
system
S07BN0304
RAB OFF indicator: illuminates when the
Reverse Automatic Braking (RAB) system is
turned OFF.
After the brake pedal is depressed, the
RAB OFF indicator will illuminate and the
system will temporarily stop operating.
The RAB OFF indicator will turn off when
the select lever is shifted to a position other
than the “R” position.
The system will operate again the next
time the select lever is shifted to “R”
position.
NOTE
. Automatic braking only holds the
vehicle for 2 seconds. Before the auto-
matic brake is released, a warning
sound (3 short beeps followed by a
long beep) will activate to alert the
driver that the automatic will be re-
leased.
. The Reverse Automatic Braking
(RAB) system may stop operating tem-
porarily in the following cases and the
RAB OFF indicator will illuminate.
– Ice, snow or mud is adhered to
the sonar sensors or the rear bum-
per near the sonar sensor.
– Objects are too close to the rear
bumper when the select lever is set
to the “R” position.
– The system detects sounds of a
similar frequency to the Reverse
Automatic Braking (RAB) system
sonar.
– The Vehicle Dynamics Control
OFF is selected.
& Canceling the Reverse Auto-
matic Braking (RAB) system
operation
S07BN04
The Reverse Automatic Braking (RAB)
system can be temporarily canceled by
any of the following operations.
. While the vehicle is stopped by the
operation of automatic braking, the brake
pedal is depressed.
. While the vehicle is stopped by the
operation of automatic braking, the accel-
erator pedal is depressed.
. The accelerator pedal is kept de-
pressed. (In this case, limited acceleration
will be canceled and the vehicle will
continue reversing.)
. The select lever is shifted to a position
other than the “R” position.
NOTE
The system will be canceled if the
object is no longer detected.
& Reverse Automatic Braking
(RAB) system ON/OFF setting
S07BN05
While the select lever is shifted to the “R”
position, the below functions of the Re-
verse Automatic Braking (RAB) system
can be set by operating the audio/naviga-
tion monitor.
Starting and operating/Reverse Automatic Braking (RAB) system
7-80
Loading ...
Loading ...
Loading ...