Ashley AGC500VFN 1,500 Sq Ft Vent Free Cast Iron Natural Gas Stove – Black

User Manual - Page 15

For AGC500VFN.

PDF File Manual, 24 pages, Download pdf file

Loading ...
Loading ...
Loading ...
© 2021 United States Stove Company
15
3. Install right bottom log (#3) on right log support
bracket in front of back log.
Back Log #1
Top Left
Log #4
Right Top
Log #5
PILOT
OFF
Left Bottom
Log #2
Right
Bottom
Log #3
4. Install top left log (#4) on top of left bottom log.
Log #5
PILOT
OFF
Back Log #1
Left Bottom
Log #2
Log #4
Right
Bottom
Log #3
Top Left
5. Install top right log (#5) on top of right bottom
log.
PILOT
OFF
Back Log #1
Top Left
Log #4
Left Bottom
Log #2
Right
Bottom
Log #3
Log #5
CAUTION:
DURING INITIAL OPERATION OF THE NEW
HEATER, BURNING LOGS WILL GIVE OFF
A PAPER BURNING SMELL AND ORANGE
FLAMES WILL BE PRESENT. SIMPLY OPEN THE
WINDOWS FOR A FEW HOURS TO VENT THE
ODOR.
GLOWING WOOL PLACEMENT
Provided with your log set is a package of Glowing
Embers (rock wool). Break up the glowing wool into
small dime sized pieces or for a ner nish use a
metal wire brush. Place it over the small holes (ports)
located on the burner pan. Cover the entire section
of holes (ports).*Replacement of loose (Glowing
Wool) must be purchased from the original
manufacturer and application of excess loose
material may adversely affect the performance of
the heater. NOTE: Wash your hands immediately
after coming in contact with wool material. In some
cases the wool can cause slight itching or burning,
avoid any contact with eyes.
WARNING:
All previously applied loose material must be
removed prior to replacement. Do not cover the
air channels with the glowing wool.
FLAME APPEARANCE
Flames from the pilot, front and rear burner should
be visually checked as soon as the heater is installed.
In addition, periodically check the ames visually
during operation.
PILOT FLAME
The pilot ame must always be present when the
heater is in operation. It should just touch the top of
the thermocouple tip for natural. Refer to the gure
below for correct pilot ame.
If the pilot ame does not touch the thermocouple,
then the burners cannot function reliably. Refer to
the gure below for incorrect shape of pilot ame.
LOG PLACEMENT
Loading ...
Loading ...
Loading ...