Loading ...
Loading ...
Loading ...
2.Tilttheshelf(asshowninfigure)0, andthenpullit
towardyou®.
if l|
Installing the water filter
Remove red cap from the filter and insert the two
tabs on the filter tip into the two slots in the
refrigerator filter receptacle. You should feel the filter
entering completely. Turn the filter to the right a quarter
turn clockwise to lock it into place. The lock symbol will be
lined up with the indicator arrow.
WATER FILTER
° Filter Reset: When the Filter reset icon turns on, you
have to c,hange the water filter. Press the Filter Reset
button _ for 3 seconds to turn the icon off.
Before removing or installing water filter:
1. IMPORTANT: Turn off household water supply.
2.Take out the top shelf and move it to the lowest level.
, .
_2]:,
Removing the water filter:
1. For first-time installation, remove filter substitute cap
(A) by turning it counterclockwise a quarter turn and
pulling it down. The substitute cap must be retained
for the future. If the filter is removed and not
replaced, it is necessary to reinstall the substitute
cap to prevent water leaks from the filter housing.
After installing water filter:
1. Replace the shelf to the initial position.
2. Dispense 2.5 gallons (9.46 L) of water to purge the
system, depressing and releasing the dispenser button
(30 seconds ON, 60 seconds OFF). Open the
refrigerator door and check the shelf area for leaks.
3. After installing filter, turn on household water supply.
To purchase replacement water filters, call
1-800-4-MY-HOME
24
Loading ...
Loading ...
Loading ...