Loading ...
Loading ...
Loading ...
Reinstalling the left (Freezer) door
f
(_
(1)\
1. Feed the water tubes through the lower hinge pin and
place the door onto the lower hinge pin.
2. Fit top hinge (6) over hinge lever latch (7) and into
place. Rotate lever (5) clockwise to secure hinge
NOTE: Regardless of the type of hinge lever, removal
process is the same.
3. Install the grounding screw (4) and connect all the
wire harnesses (3).
4. Hook tab on door switch side of cover (2) under edge
of wire opening in cabinet top. Position cover into
place. Insert and tighten cover screw (1).
5. Reconnect the water tubes by inserting the tubes into
the connectors.
Collet
Insert Line.
DOOR ALIGNMENT
Before adjust the doors, remove the base grille.
See BASE GRILLE INSTALLATION for reference.
First select your adjusting tool, it could vary.
Type 1
Adjusting tool: Flat blade screwdriver
If the freezer compartment door is lower than
the refrigerator compartment door, make them
level by inserting flat blade screwdriver into the
groove of the left leveling leg and rotating it
clockwise.
Left leveling
leg
Height
difference
\
If the freezer compartment door is higher than the
refrigerator compartment door, make them level by
inserting flat blade screwdriver into the groove of
the right leveling leg and rotating it clockwise.
Height
difference
Right leveling leg
/ ,
iΒΈ _,
11
Loading ...
Loading ...
Loading ...