Loading ...
Loading ...
Loading ...
61
CONNECTIONS – ELECTRICAL
All electrical work and permanent wiring must be carried out by a qualified person and in accordance with the
Wiring Rules AS/NZS 3000 and all local codes and regulatory authority requirements.
Warning: Temperature controllers must not be fitted to this water heater (874 series) if it is installed as an
in-series gas booster with a solar water heater system because water at a temperature much higher than the
controller setting can be delivered. If a solar water heater is installed to an existing water heater installation,
then all controllers must be disconnected and removed.
The water heater is supplied with a 1.8 metre lead and plug and requires a weatherproof 240 V 50 Hz general
purpose outlet (GPO) to be located within 1.2 metres of the installation. The GPO must be clear of the flue
exhaust, draining water, gas supply pipe and water connections.
The power consumption of the water heater is:
Power consumption (watts) - Burner on, anti-frost device inactive
Model
874812, 876812
874816
874T16, 876T16
874820, 876820
874824
874826, 876826
874T26, 876T26
Natural
33
38
44
50
54
Propane
36
40
50
57
59
Universal LG Gas
-
38
47
59
-
Power consumption (watts) - Burner on, anti-frost device active
Model
874812, 876812
874816
874T16, 876T16
874820, 876820
874824
874826, 876826
874T26, 876T26
Natural
101
106
112
118
122
Propane
104
108
118
125
127
Universal LG Gas
-
106
115
127
-
The water heater will only operate on a sine wave at 50 Hz. Devices generating a square wave cannot be used
to supply power to the water heater.
Loading ...
Loading ...
Loading ...