Loading ...
Loading ...
Loading ...
Keep the Worklight dry, clean and free from oiil and grease. Always use
a clean cloth when cleaning. Never use brake fluids, gasoline, petroleum-
based products, or any strong solvent to clean the Worklight.
Do not expose the Worklight to rain or wet conditions. Water entering the
Worklight will increase the risk of electric shock.
ELECTRICAL SAFETY
Avoid body contact with grounded surfaces, such as pipes, radiators,
ranges, and refrigerators. There is an increased risk of electric shock if your
body is grounded.
Power tool plugs must match the outlet. Never modify the plug in any way.
Do not use any adapter plugs with grounded power tools. Unmodified plugs
and matching outlets will reduce the risk of electric shock.
Do not expose power tools to rain or wet conditions. Water entering a
power tool will increase the risk of electric shock.
Do not abuse the cord. Never use the cord for carrying, pulling, or
unplugging the power tool. Keep the cord away from heat, oil, sharp edge, or
moving parts. Damaged or entangled cords increase the risk of electric shock.
When operating a power tool outdoors, use an extension cord suitable
for outdoor use. Use of a cord suitable for outdoor use reduces the risk of
electric shock.
PERSONAL SAFETY
Stay alert, watch what you are doing and use common sense when
operating a power tool. Do not use a power tool while you are tired or
under the influence of drugs, alcohol or medication. A moment of inattention
while operating power tools may result in serious personal injury.
Use safety equipment. Always wear eye protection. Safety equipment
such as dust masks, non-skid safety shoes, hard hat or hearing protection
used for appropriate conditions will reduce personal injuries.
Avoid accidental starting. Ensure the switch is in the off position before
plugging in. Carrying power tools with your finger on the switch or plugging
in power tools that have the switch on invites accidents.
Remove any adjusting key or wrench before turning the power tool on. A
wrench or key left attached to a rotating part of the power tool may result in
personal injury.
• Do not overreach. Keep proper footing and balance at all times. This
enables better control of the power tool in unexpected situations.
Dress properly. Do not wear loose clothing or jewelry. Keep your hair,
clothing and gloves away from moving parts. Loose clothes, jewelry or
long hair can be caught in moving parts.
10005 Manual_Revised_08-0724 Page 6
Loading ...
Loading ...
Loading ...