Loading ...
Loading ...
Loading ...
_, WARNING: If any part is broken or missing, do not attempt to operate the
worklight until the broken or missing part is replaced. Failure to do so could
result in possible serious injury.
_, WARNING: Do not attempt to modify this worklight or create accessories not
recommended for use with this worklight. Any such alteration or modification is
misuse and could result in a hazardous condition leading to possible serious injury.
UNPACKING
This product has been shipped completely assembled.
• Carefully remove the tool and any accessories from the box. Make sure that
all items listed in the packing list are included.
• Inspect the tool carefully to make sure that no breakage or damage occurred
during shipping.
• Do not discard the packing material until you have carefully inspected and
satisfactorily operated the tool.
• If any part is damaged or missing, please refer to the numbers listed on the
back page of operator's manual.
PACKING LIST
LED Worklight
Operator's Manual
BATTERY PROTECTION
The battery circuitry protects the battery pack from extreme temperature, over-
discharge, and over-charge. To protect the battery from damage and prolong its
life, the battery pack circuitry will turn off the battery pack if it becomes overloaded
or if the temperature becomes too high during use. This may happen in extremely
high torque, binding, and stalling situations. This intelligent system will shut down
your battery pack if its operating temperature exceeds 176°F (80°C) and will begin
normal operation when it retums to 32°F (0°C) - 122°F (50°C).
NOTE: A significantly reduced run time after fully charging the battery pack indicates
that the batteries are near the end of their usable life and must be replaced.
COLD WEATHER OPERATION
This Lithium-Ion battery pack will provide optimal performance in temperatures
between 32°F (0°C) and 104°F (40°C). When the battery pack is very cold, it may
"pulse" for the first minute of use to warm itself up. Put the battery pack on a
10005 Manual_Revised_08-0724 Page 14
Loading ...
Loading ...
Loading ...