Loading ...
Loading ...
Loading ...
I
w
m
I !
i .mi
w
n,
iii_il_!iiiiiiiiiiiii,l,iiii
m
I
Before you call for service...
Troubleshooting tips
Save time and money! Review the charts on the following
pages first and you may not need to call for service.
Topburners do not light
or do not bum evenly
Possible Causes What To Do
Plug on rmlge is not completely
inserted in the electrical outlet.
Burner hole or slits on the side
of the burner may be clogged.
• Make sure electrical plug is plugged into a live, properly
grounded buffet.
• Relnove tile burnei_ (on models with standard twin
bm'ne_) or bm'ner heads and caps (on models with
sealed bm'ne_s) and clean them with a sewing needle
or twist-de. Make sure you do not enlarge tile holes.
On sealed burner models, check and clean tile electrode
area tot btli'ned-_)n toed or grease.
hnproper burner assembly. • Make sure the burner parts are installed correctly.
See the Care and cleaning of the range section.
Burnerflames very hnproper air to gas ratio. • /f rauge is couuected to l,P gas, coutnct the l/e_sou
large oryellow who installed your rm_ge or made tile couve_iou.
Surface burners light
but oven does not
The oven gas shut-off valve
may have accidentally been
moved during clemfing or
movh_g.
• To check tile oven gas shut-off wdve on sealed burner
models, remove tile wam/ing drawe_; storage drawer or
kick panel (see tile Care and cleaning of the range section)
and look fin" the g_s shut-off lever at tile back of the range,
Leveris
shownclosed.
PULLTOOPEN.
Sealed burner models
• To check tile oven gas shut-off valve on standard twin
bm'ner models, raise tile cooktop and look fin" tile gas
sh ut-off lever at tile extreme right rear corne_: Follow
tile directions in box A or B that match yore" regulator
_])e.
Leveris shownclosed. A
PULkTOO,PEN._
,;;;,1 __ \
Standardtwin burnermodels Standardtwin burnermodels
Control signals after You forgot to enter a bake • Touch the Bake pad :rod desired teluperattu'e or
entering cooking time or temperature or clemah_g time. the Self Clean pad and desired cle:m time.
start time ton some models,
Plug on rmlge is not completely • Make stlre electrical l/ltlg is ph/gged lute a live,
do not work inserted in the electrical outlet, properly grotmded outlet.
(on some models) A fuse ha your home may be • Replace the fl_se or reset the circuit breaker:
blown or the circuit breaker
tripped.
Oven controls improperly set. • See the Using the clock and timer section.
46
Loading ...
Loading ...
Loading ...