Loading ...
Loading ...
Loading ...
EN
39
Operation
www.bora.com
6.5.10 Cooking zone timer
INFO The timer function can be used for each cooking
zone. Several timers can be activated at the same
time (multi-timer).
INFO When the bridging function is active, the timer is
adopted for both cooking zones.
Activating the timer
Tap on a cooking zone
The additional cooking zone functions are displayed.
If the chosen cooking zone is not yet active (= power
level
0
) a power level can now be set.
Tap the timer button
The time appears in the 7-segment display above the
sliders in hours, minutes and seconds (
0
:
0
0
:
0
0
).
The system changes to colour mode “beige”.
Setting the time
Select the desired power level:
Command Selection in hr/min/sec
Tap
0
:
0
0
:
0
0
Tap
0
:
0
0
:
0
0
Command Increase time Decrease time
Tap
Swipe
upwards
downwards
Tab. 6.3 Setting the time
The start button appears in the operating panel
display.
Starting the timer
Tap the start button
An acoustic signal can be heard and the set value is
confirmed.
The set time starts to count down.
The timer symbol is shown next to the cooking zone.
The operating panel display changes to the standard
display after 3.5 seconds.
10 seconds before the set time lapses, the system
flashes the remaining time. The corresponding cooking
zone flashes.
Showing the remaining time
The cooking zone timer is active and the time counts
down:
Tap the cooking zone
The remaining time is shown in the operating panel
display.
Deactivating the warming function
Tap the required cooking zone
Long press on the warming button
or
tap the minus button until the power level is 0
The warming function is deactivated.
The residual heat indicator
H
appears in the cooking
zone display if necessary.
6.5.9 Cleaning function on the Tepan
stainless steel grill CKT
INFO The cleaning function adjusts the Tepan stainless
steel grill to a constant temperature of 70 °C,
which is perfect for cleaning.
Activating the cleaning function
Tap the required cooking zone
Tap the warming button
The 1st warming level (
,
) is displayed.
Tap the minus button
or
swipe downwards
or
tap the lowest position on the slider
The two cooking zones are automatically linked and
the bridging symbol is displayed.
C
appears in both cooking zone displays and
C
L
E
A
%
appears in the multi-function display.
The cleaning function is activated and the Tepan
stainless steel grill is heated to 70 °C.
During the heating phase, the Hot indicator flashes and
an animation appears in the cooking zone displays.
As soon as cleaning temperature is reached, the Hot
indicator lights up constantly and a different animation
appears in the cooking zone displays.
Deactivating the cleaning function
Tap the required cooking zone
Long press on the warming button
or
tap the minus button until the power level is 0
The cleaning function is deactivated.
The residual heat indicator
H
appears in the cooking
zone display if necessary.
INFO The cleaning function is automatically deactivated
after 10 minutes.
Loading ...
Loading ...
Loading ...