Loading ...
Loading ...
Loading ...
EN
24
Appliance description
www.bora.com
Power levels
Activity Power level
Melting of butter and chocolate, breaking up
gelatine
1
Keeping sauces and soups warm, soaking rice
1
–
3
Cooking potatoes, pasta, soups, ragouts,
steaming fruit, vegetables and fish, defrosting
food
2
–
6
Frying in coated pans, moderate frying (without
overheating the fat) of pork cutlets, fish
6
–
7
Heating up fat, browning fish, cooking thickened
sources and soups, making omelettes
7
–
8
Cooking large amounts of liquids, grilling steaks
and heating water
9
Grilling steaks and heating up water
ßp
Tab. 4.13 Recommendations for power levels
The specifications provided in the table are standard
values.
Depending on the cookware and filling quantity, it is
recommended to either decrease or increase the power
level.
Power setting on cooktop CKCH
The front cooking zone on the Hyper glass ceramic
cooktop CKCH is fitted with a temporary power setting.
ßp
appears in the operating panel display.
The power setting can be used in order to quickly heat up
large quantities of water. If the power setting is activated,
the cooking zones will run at extra high power. After
10 minutes, the cooking zone is automatically switched
back to power level
9
.
Suitable cookware
INFO The heating and heat through time for the base
of the cookware as well as the cooking results
are significantly influenced by the structure and
material of the cookware.
Cookware with this symbol is suitable for radiant
heating elements. The cookware used for radiant
heating surfaces must be metal and have good
heat conducting properties.
Suitable cookware is made of:
stainless steel, copper or aluminium
enamelled steel
cast iron
INFO The BORA induction wok pan HIW1 is ideal for the
induction wok cooktop CKIW and is available as
an accessory.
Perform a magnet test, if necessary. If a magnet sticks
to the base of the utensils, they are normally induction
compatible.
Pay attention to the cookware bottom. The base of
the cookware should not show any sign of curvature
(exception: wok cooktop CKIW). Due to incorrect
temperature monitoring of the hob caused by the
air gap between the cookware and the temperature
sensor underneath the hob, overheating may occur.
The bottom of the cookware must not have any
sharp grooves or sharp edges to avoid scratching the
cooktop.
Place the cookware (without a mat or similar) directly
onto the glass ceramic.
Noises
The following noises may occur in the cookware when
using induction cooking zones, depending on the material
and the finish of the base:
Humming may occur when using a high power level.
It decreases or disappears if the power level is
decreased.
Crackling or whistling may occur due to the bases
of cookware being made of different materials (e.g.
sandwich base).
Clicking sounds may occur during electronic switching
procedures especially at low power levels.
Whirring may occur when the cooling fan is switched
on. In order to increase the service life of the
electronic system, the cooktop is equipped with a
cooling fan. The cooling fan switches on automatically
if the cooktop is used intensively. You will hear a
whirring sound. The cooling fan may continue to run
after the appliance has been switched off.
4.3.5 How the Hyper and HiLight cooktops
work (CKCH, CKCB)
Under the cooking zone is a radiant heating element with
a heating tape. When the cooking zone is switched on,
the heating tape generates radiant heat, which radiates to
the cooking zone and heats it up.
Loading ...
Loading ...
Loading ...