Loading ...
Loading ...
Loading ...
How the Cycle Works
IMPORTANT: The heating and cooling of porcelain on steel in the
oven may result in discoloring, loss of gloss, hairline cracks and
popping sounds.
The Self-Cleaning cycle uses very high temperatures, burning soil
to a powdery ash.
The oven is preset for a 3 hour clean cycle; however, the time can
be changed. Suggested clean times are 2 hours for light soil and
between 3 hours and 4 hours for average to heavy soil.
Once the oven has completely cooled, remove ash with a damp
cloth. To avoid breaking the glass, do not apply a cool damp
cloth to the inner door glass before it has completely cooled.
The oven light will not work during the Self-Cleaning cycle.
On some models, the surface elements will not work during the
Self-Cleaning cycle.
When "LOCK" shows in the display, the door cannot be opened.
To avoid damage to the door, do not force the door open when
"LOCK" is displayed.
If an oven door is left open, "Door Open Clean Canceled" will
appear in the display and a signal will beep. Close the oven door
and press CLEAN MODES.
NOTE: Only one oven can use the Self-Clean cycle at atime, and
a 24-hour wait is recommended before starting the next Self-
Clean cycle.
To Self-Clean:
1. Close the oven door.
2. Press SELF CLEAN.
For Single Ovens Only: "REMOVE RACKS" will scroll in the
selected oven text area.
3. For Double Ovens Only: "PRESS 1 FOR UPPER OVEN" will
appear in the upper oven text area. "PRESS 2 FOR LOWER
OVEN" will appear in the lower oven text area. Press the "1"
or "2" number keypads to select the desired oven. "REMOVE
RACKS" will scroll in the selected oven text area.
4. "Select Level" and "Press 1. Level 1 (Quick) 2. Level 2, 3.
Level 3, 4. Level 4 (reg), 5. Level 5, 6. Level 6 (Maxi)" will scroll
on the display text area.
5. Use the number keypad to select the clean level.
6. Press START.
After the door is locked, "SELF CLEAN" will scroll in the
selected text area until the clean cycle is finished.
When the self-clean cycle ends:
"CLN COMPLETE will scroll in the selected oven text area.
"OVEN COOLING" will scroll in the display until the oven
temperature falls below 500°F (260°C).
"UNLOCKING" will be displayed until the oven door unlocks and
the lock icon turns off.
To Delay Start Self-Clean:
1. Press Delay Start.
2. For Double Ovens Only: "PRESS 1 FOR UPPER OVEN" will
appear in the upper text area, and "PRESS 2 FOR LOWER
OVEN" will appear in the lower text area. Press the "1" or "2"
number keypads to select the desired oven.
3. "--:--" will be displayed, and "Set time to delay. Then Press
START" will scroll from right to left in the selected oven text
area. Use the number keypad to enter the desired time to
delay.
4. Press START. "Select cooking/cleaning mode" will scroll in
the selected oven text area.
5. Press SELF CLEAN. "REMOVE RACKS" will scroll in the
selected oven text area for 5 seconds, followed by "SELECT
OPTION."
6. "Select Level" and "Press 1. Level 1 (Quick) 2. Level 2, 3.
Level 3, 4. Level 4 (reg), 5. Level 5, 6. Level 6 (Maxi)" will scroll
in the display text area.
7. Use the number keypad to select the clean level.
8. Press START. The cleaning cycle will begin when the delay
time is reached.
When the self-clean cycle ends:
"CLN COMPLETE will scroll in the selected oven text area.
"OVEN COOLING" will scroll in the display until the oven
temperature falls below 500°F (260°C).
"UNLOCKING" will be displayed until the oven door unlocks and
the lock icon turns off.
IMPORTANT: Before cleaning, make sure all controls are off and
the oven is cool. Always follow label instructions on cleaning
products.
Soap, water and a soft cloth or sponge are suggested first unless
otherwise noted.
STAINLESS STEEL (on some models)
To avoid damage to stainless steel surfaces, do not use soap-
filled scouring pads, abrasive cleaners, Cooktop Cleaner, steel-
wool pads, gritty washcloths or abrasive paper towels.
Cleaning Method:
Rub in direction of grain to avoid damage.
• Liquid detergent or all-purpose cleaner:
Rinse with clean water and dry with soft, lint-free cloth.
• Vinegar for hard water spots.
OVEN DOOR EXTERIOR
Cleaning Method:
• Glass cleaner and a soft cloth or sponge:
Apply glass cleaner to soft cloth or sponge, not directly on
panel.
OVEN DOOR INTERIOR
Cleaning Method:
• Self-Clean cycle:
For optimal door cleaning result, wipe away any deposits with
a damp sponge before running cycle.
CONTROL PANEL
Activate the Control Lock to avoid touch screen activation during
cleaning. See "Control Lock" section.
To avoid damage to the control panel, do not use abrasive
cleaners, steel-wool pads, gritty washcloths or abrasive paper
towels.
Cleaning Method:
• Glass cleaner and soft cloth or sponge:
Apply glass cleaner to soft cloth or sponge, not directly on
panel.
14
Loading ...
Loading ...
Loading ...