Loading ...
Loading ...
Loading ...
_ _,_/¸ _
Food Poisoning Hazard
Do not let food sit in oven more than one hour before
or after cooking.
Doing so can result in food poisoning or sickness.
Cook & Hold allows the oven to be set to cook for a set length of
time, followed by a 1-hour Keep Warm cycle.
Delay Cook & Hold allows the oven to be set to start cooking
after a length of time you set, cook for a set length of time,
followed by a 1-hour Keep Warm cycle.
Delay start should not be used for food such as breads and
cakes because they may not bake properly. Do not use delayed
baking if oven is already hot.
NOTE: During the Cook & Hold function, the Delay Start and
Cook Time are applied to the baking itself and not for the
"Holding Warm" phase.
1. Press BAKE for the desired oven.
"BAKE" will scroll in the text area, and 350°F (177°C) will be
displayed.
"Set temp or Press START" will scroll in the text area.
2. Use the number keypad to enter the desired temperature.
NOTE: The temperature may be changed at any time by
using the number keypad to enter the desired temperature
and then pressing START. Changing the temperature once
food is placed in the oven could affect the performance.
3. Press COOK & HOLD. Use the number keypad to enter the
desired cook time. "Press START" will scroll in the text area.
NOTE: The Set Cooking Time can be changed at any time
during the cooking cycle by pressing COOK TIME. Once the
cook time countdown is complete, "Cooking complete -
Holding warm" will scroll in the text area until the door is
opened, Cancel is pressed, or 1 hour has passed.
4. (Optional) If a Delay Start is desired, press DELAY START. Use
the number keypad to enter the desired time for delay. "Press
START" will scroll in the text area. You will be prompted to
enter a Set Cooking Time. The Set Cooking Time is
mandatory when using setting a Delay Start.
5. Press START. The oven will preheat, and a beep will sound
when the preheat is done.
6. Place the food in the oven and close the oven door when
preheat is complete.
7. At the end of the time set, the oven will keep warm
automatically, the end of cycle tone will sound and "Cooking
Complete - Holding Warm" will appear in the text area.
8. Press CANCEL to complete the cycle.
9. Remove food from the oven.
OVENCARE
Burn Hazard
Do not touch the oven during the Self-Cleaning cycle.
Keep children away from oven during
Self-Cleaning cycle.
Failure to follow these instructions can result in burns.
IMPORTANT: The health of some birds is extremely sensitive to
the fumes given off during the Self-Cleaning cycle. Exposure to
the fumes may result in death to certain birds. Always move birds
to another closed and well-ventilated room.
Self-clean the oven before it becomes heavily soiled. Heavy soil
results in longer cleaning and more smoke.
Keep the kitchen well-ventilated during the Self-Cleaning cycle to
help get rid of heat, odors, and smoke.
Do not block the oven vent(s) during the Self-Cleaning cycle. Air
must be able to move freely. Depending on your model, see
"Oven Vent" or "Oven Vents" section.
Do not clean, rub, damage or move the oven door gasket. The
door gasket is essential for a good seal.
Allow the oven to cool to room temperature before using the Self-
Clean feature. Ifyour oven cavity is above 170°F (77°C), "Oven
Cooling" will appear in the display and the Self-Clean cycle will
not activate until it cools down.
Prepare Oven:
• Remove the broiler pan, grid, cookware and bakeware and,
on some models, the temperature probe from the oven.
• Remove oven racks to keep them shiny and easy to slide.
See "General Cleaning" section for more information.
• Remove any foil from the oven because it may burn or melt,
damaging the oven.
• Hand clean inside door edge and the 11/2"(3.8 cm) area
around the inside oven cavity frame, being certain not to
move or bend the gasket. This area does not get hot enough
during self-cleaning to remove soil. Do not let water, cleaner,
etc., enter slots on door frame. Use a damp cloth to clean this
area.
Wipe out any loose soil to reduce smoke and avoid damage.
At high temperatures, foods react with porcelain. Staining,
etching, pitting or faint white spots can result. This will not
affect cooking performance.
13
Loading ...
Loading ...
Loading ...