Loading ...
Loading ...
Loading ...
- 12 -
Revision 02/2022
Copyright © 2022, Fast ČR, a.s.
Note:
Avoid excessive bending of the hose. To ensure proper
operation of the mobile air conditioner, it is important not to
overload the hose or to bend it unnecessarily. Excessive
loading or bending may damage the hose.
Installing the flexible hose using the textile gasket seal
• The textile gasket seal B15 is suitable for tilt-open, sash and roof
windows. The textile gasket seal B15 is fitted with aVelcro zip tape to
make its installation in the window easier. Open the window and into
the created crevice install the textile gasket seal B15. We recommend
that you thoroughly degrease the location where you will be attaching
the textile gasket seal B15 using an appropriate cleaning agent.
Remove the protective paper strip and stick the tape on to the window
frame.
• In order to be able to insert the flexible hose B3, the gasket seal is
fitted with an integrated zip. Open the zip in such alocation that will
enable you to easily insert the flexible hose B3.
• It is not necessary to remove the textile gasket seal B15 from the
window when not using the mobile air conditioner. The window can be
closed even with the gasket seal installed.
Installing the flexible hose into awall
• It is important that the installation into awall is performed by
aqualified technician.
• Drill ahole into the wall with ahole diameter of 125 mm at aheight
between 30 cm and 120 cm from floor. Insert the flange with plug B4
into the hole and secure it to the wall using the set of screws B6 and
dowels B5.
• Extend out the flexible hose B3, open the plug of the flange B4 and
insert the flexible hose B3 into the flange. Avoid excessive bending
of the hose.
• When not using the mobile air conditioner, close the plug on the
flange B4.
Note:
To ensure proper operation of the mobile air conditioner,
it is important not to overload the hose or to bend it
unnecessarily. Excessive loading or bending may damage
the hose.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CONTROLS OF THE MOBILE AIR CONDITIONER
A.CONTROL PANEL
• Insert the power plug into apower socket. Now the mobile air
conditioner sets itself to the stand-by mode.
Turning the mobile air conditioner on and off
• To turn on the mobile air conditioner, press button
C8. Press it again
to turn the mobile air conditioner off.
Note:
Never turn off the mobile air conditioner by pulling the
power cord out of the power socket. Turn off the mobile air
conditioner using button
C8, wait afew minutes and
then pull out the power cord.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
OPERATING MODES
1. Cooling mode
• Repeatedly press button MODE C3 until the cooling indicator
is lit.
Using the –/+ buttons, set the desired temperature. You can set the
temperature in the range from 17 to 35°C.
• Using button FAN C6, set the fan speed. Repeatedly press button FAN
C6 to switch the speed in the following order:
(high speed) –
(medium speed) – (low speed) – automatic speed (depending
on the model, all indicator lights are either lit or not lit). Each time the
button is pressed, the respective indicator will be lit on the control
panel.
2. Fan mode
• Repeatedly press button MODE C3 until the fan mode indicator
is lit. Using button FAN C6, set the fan speed. Repeatedly press
button FAN C6 to switch the speed in the following order: (high
speed) – (medium speed) – (low speed) – automatic speed
(depending on the model, all indicator lights are either lit or not lit).
Each time the button is pressed, the respective indicator will be lit on
the control panel. In this mode, it is not possible to set the temperature,
nor is it necessary to connect the flexible hose B3 to the mobile air
conditioner.
3. Dehumidification mode
• Make sure that the flexible hose B3 is disconnected from the
air conditioner. Repeatedly press button MODE C3 until the
dehumidification indicator
is lit. It is not possible to set the
temperature or fan speed in this mode. The fan speed is automatically
set.
4. Automatic mode
• In the automatic mode, the mobile air conditioner will automatically
set the operating mode (cooling / fan / dehumidification) depending
on the set temperature and the temperature in the room. The mobile
air conditioner will automatically control the temperature in the room
based on the temperature that you set. It is not possible to set the fan
speed in the automatic mode.
• Repeatedly press button MODE C3 until the automatic mode indicator
is lit. In the automatic mode both the automatic mode indicatoras
well as the indicator of the selected operating mode will be lit.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
FUNCTIONS OF THE MOBILE AIR CONDITIONER
1. Timer functions
• While the mobile air conditioner is turned on, press the Timer C2
button. You will enter the automatic shut-off mode and „TIMER OFF“
will be shown on the display C13. Use the – / + buttons to set the
desired duration. Press the TIMER C2 button within 5 seconds to enter
the automatic start mode. „TIMER ON“ will be shown on the display
C13. Use the – / + buttons to set the desired duration.
• While the mobile air conditioner is turned off, press the TIMER C2
button and use the – / + buttons to set the desired duration. Press the
TIMER C2 button within 5 seconds to enter the automatic shut-off
mode. Use the – / + buttons to set the desired duration.
• The desired start / shut-off duration can be set in 30-minute
increments (up to 10 hours) and in 1-hour increments (up to 24 hours).
The mobile air conditioner will automatically countdown the set
duration.
• The mobile air conditioner will automatically switch to the previously
set temperature if no button is pressed within 5 seconds.
• If you need to turn off the timer, turn the mobile air conditioner on or
off, or alternatively set the timer to 0 hours.
2. Sleep function
• The sleep function is used to reduce overnight power consumption.
• Press the SLEEP C7 button. The temperature will increase by1 °C
within 30 minutes. Within the next 30 minutes the temperature will
increase by another 1°C. The mobile air conditioner will maintain this
new temperature for afurther 7 hours. The temperature setting will
then return to the initially set temperature and the sleep function will
be automatically cancelled.
Note:
This function cannot be set in the fan and dehumidification
modes.
3. Flap swing function
• Press the SWING C1 button to automatically start the swinging motion
of the flap. While the flap is swinging, press the SWING C1 button
again to stop the flap at acertain angle.
Loading ...
Loading ...
Loading ...