Loading ...
Loading ...
Loading ...
Installation
7
Setting up doorbell
1. The doorbell can be xed on a wall or a door frame.
Drill two holes horizontally, 15mm apart and place the
supplied anchors into the two holes.
2. Hang the doorbell onto the two anchors and then
insert and tighten the screws. Stick the white name
plate over the two holes.
3. The doorbell can be stuck onto a door or window
using the supplied strong adhesive tape. Remove the
protective paper from the adhesive tape on the back of
the doorbell and stick to the required door or window.
Wall Mounting the ringer
1. Drill two holes horizontally, 96mm apart, and leave
the screws protruding 5mm from the wall.
2. Hang the base onto the two screws (supplied) and
pull the base down to lock it on.
Table Mounting
If you want to mount the AM20 on a table, simply clip it
into the base stand and place on a table.
Loading ...
Loading ...
Loading ...