Loading ...
Loading ...
Loading ...
19
GAS CONNECTION
Pressure regulator installation
All heavy duty, commercial type cooking equipment must have a pressure
regulator on the incoming service line for safe and efficient operation,
since service pressure may fluctuate with local demand.
z
The regulator supplied with this range must be installed before
any gas connections are made.
z
Use supplied pressure regulator only.
IMPORTANT!
Use two wrenches to tighten the connection.
1 Connect the 1/2" (12.7mm) NPT (conical) male connector
to the pressure regulator and tighten by using a wrench.
Do not over tighten the connector. Over tightening may
crack regulator.
3 Insert the extension pipe into the supplied
support bracket as shown:
z
Bend in the metal tab 90 degrees to allow
the pipe to be fitted into the bracket.
z
Bend the metal tab back into it’s original
position to secure.
Gasket
Arrow
Regulator cover
Arrow
2 Connect the 1/2" (12.7mm) NPT connector and
pressure regulator group to the extension pipe
ensuring the supplied gasket is positioned between.
The regulator cover must be oriented toward the front
side of the range.
Regulator cover
Lock
90°
90°
1
2
Loading ...
Loading ...
Loading ...