Loading ...
Loading ...
Loading ...
12
FITTING THE ADJUSTABLE FEET
MOVING THE RANGE
Fitting the adjustable (rear) feet covers (optional)
If installing rear feet covers use the following instructions to attach the mounting
brackets to the base of the range.
1 Remove screws A, B and C from
the plate on the base of the range.
2 Replace screw C with one of the
screws supplied with the feet covers.
z
This screw must be replaced before
attaching the mounting bracket to the
base of the range.
3 Attach the mounting bracket to
the base of the range using the
supplied screws.
z
Ensure the two supplied washers
are fitted between the rear edge
of the bracket and the base of the
range (as shown).
4 Secure covers to brackets using the
provided screws.
Washers
IMPORTANT!
z
When raising the range to upright
position always ensure two people
carry out this manoeuvre to prevent
damage to the adjustable feet.
z
Be careful: do not lift the range by
the oven door handle, the hob rail
or the cooktop trim as this may
damage the appliance.
z
When moving range to its final
position DO NOT DRAG.
Lift feet clear of floor.
C
A
BB
Loading ...
Loading ...
Loading ...