Loading ...
Loading ...
Loading ...
Converting Oven Burner for Use with LP\Propane
1. Remove storage drawer.
• See Removing Storage Drawersection.
2. Locate and remove 2 screws attaching Z-shaped
cover plate.
• Cover plate located in center, rear of storage drawer
cavity.
• Removing cover plate exposes oven burner orifice
and air shutter.
3. Turn orifice hood clockwise until snug.
• Do not overtighten orifice hoods. Orifice hoods can
strip.
4. Replace cover plate and storage drawer.
.
with 5/16inch socket wrench and replace with LP/
propane burner spud stamped "58".
• Attach unused burner spud near regulator for future
use.
Reinstall broiler and, if necessary, oven door.
A
C
B
A Air Shutter Screw
B Orifice Hood
C_ir Shutter
Converting Oven Burner
Converting Broiler Burner for Use with LP\Propane
1. Locate orifice spud attached adjacent to pressure
regulator and remove for later use.
• Orifice spud used for LP/propane gas is silver and
is stamped "58".
2. Open oven door and locate broiler burner on oven
ceiling.
• Remove oven door to make conversion easier. See
Removing Oven Door section.
3. Remove 2 screws securing front of burner to oven
ceiling and remove broiler.
• Be careful not to damage ignitorwhile removing
broiler.
4. Unscrew natural gas burner spud stamped "52"
A Screw
B Broiler
C SpudiOriface
Converting Broiler Burner
Converting Type 1 Pressure Regulator for Use with
Natural Gas
1. Remove pressure regulator cap with a wrench.
2. Remove plastic insert from pressure regulator cap.
• Plastic insert fits tightly in cap.
3. Reverse plastic insert and carefully push plastic insert
firmly into hole in pressure regulator cap.
• Insert must show "NAT" or be blank.
4. Place pressure regulator cap on pressure regulator
and tighten.
• Insert should not disturb spring in body of regulator.
Converting Type 2 Pressure Regulator for Use with
Natural Gas
1. Remove pressure regulator cap with a wrench.
2. Reverse pressure regulator cap.
• Insert shows "NAT" or is blank.
3. Place pressure regulator cap on pressure regulator
and tighten.
10
Loading ...
Loading ...
Loading ...