Loading ...
Loading ...
Loading ...
14
•Replacingbinswithtelescopicextensionslides
1. Ensure that the telescopic slides are pushed in
all the way.
2. Slide the bin into place over the slides and push in until
it stops. The bin will not be closed all the way.
3. Open the bin to access the finger tabs at the ends of
the telescopic slides, on each side of the bin. Using
your thumb and forefinger, lift the bin over the end of
the slide and clip in place. If the bin is not fully engaged
on the slide, it may not stay on the slide when
fully extended.
the end of the slide must
be clipped into place
4. Fully close the bin.
When replacing the drawers after cleaning, we
recommend fitting the lower drawer first.
Door storage bins
The top mount models, bottom mount freezer model and
all refrigerator models are fitted with door storage bins.
These bins adjust to meet different storage needs. All the
door bins are completely removable for cleaning. If you
want to remove or adjust a bin, lift it over the support lugs
on the inner door panel. To replace, push the bin down
over the support lugs to lock it in place.
Dairy compartment
Use the dairy compartment to store foods like butter,
margarine and cheeses. The compartment is slightly
warmer than the rest of the refrigerator compartment,
while the lid provides protection against odours.
Chiller bin (where fitted)
Use the chiller bin to store foods like small goods, fresh
or cooked meat and cheese, or as an additional crisper.
The bin will prevent strong food odours from creeping into
the rest of the refrigerator. To remove the chiller bin, pull it
forward, then lift it up and pull it further forward.
Bottle caddy
The bottle caddy is made of stainless steel. It is used to
store various types of bottles like wine or beer. Bottles
should be stored with the bottom end towards the back of
the refrigerator.
Freezer baskets (built-in freezer only)
Freezer baskets and a freezer shelf are fitted to built-in
freezers. Wire baskets are used to provide easy visibility
of the contents. Both the baskets and the shelf pull out for
easy access and have a stop to prevent the basket and
shelf being pulled out too far.
To remove the basket or shelf, pull it out until it hits the
stop then lift the front to unhook the stop while continuing
to pull forward.
Freezer drawers
Freezer drawers are fitted to bottom mount models and
single door all freezer models. The drawers are mounted
on telescopic extension slides, to enable full access to the
content in the drawer. Clear plastic fronts provide easy
visibility of foods.
•To remove the drawer for cleaning,
1. Empty food from the drawer.
2. Remove the drawer by pulling it forward and lifting
the front to unhook it from the slides. Once you have
removed the drawer, ensure the slides are pushed
back so they are fully closed.
USING YOUR APPLIANCE
Loading ...
Loading ...
Loading ...