Loading ...
Loading ...
Loading ...
TRUE RESIDENTIAL
®
TEC_TM_155 REV. A12/07/2021Page 6 of 64
INSTALLATION CHECKLIST
To ensure no part of the installation process has been overlooked, complete the checklist below.
Has an authorized True dealer or licensed installer inspected stainless steel surfaces
for imperfection?
(Cosmetic defects are covered by a limited 30-day warranty)
Have all packaging materials been removed?
Is the unit properly leveled with all leveling legs contacting the floor?
Has the water filter been installed? Has the water supply been turned on?
Have the water supply and drain connections been made?
Is the water supply temperature always between 40-100˚F (4.4-7.8˚C)?
Has the ice machine drain line been routed into an open drain with no more than 48”
(1,219.2 mm) vertical rise for 1/2” I.D. tubing and no more than 100’ (30.48 m) run?
Has the water supply been turned on?
Is the power cord plugged into a properly grounded three-prong outlet in accordance with all
applicable electrical codes?
Have all connections been checked for water leaks? If not, pour water directly into the ice
storage bin to ensure drain pump operation and inspect for leaks.
Were the ice maker and storage bin disinfected prior to use? If not, see “Sanitizing” (page 50).
Has the ice machine been turned on? During the initial fill, can you hear the water valve turn
on and see water filling the reservoir tank?
After the first ice cycle, did all 24 ice cubes fall into the bin during harvest?
Have the first two batches of ice been discarded?
Has the customer reviewed the unit’s operation in this manual?
Has the customer reviewed the schedule of maintenance of the machine?
Loading ...
Loading ...
Loading ...