Loading ...
Loading ...
Loading ...
15” TRUE ICE
®
MACHINE INSTALL GUIDE
TEC_TM_155 REV. A
12/07/2021
Page 39 of 64
BIN LIGHT
Press LIGHT to control the bin light.
• Press LIGHT repeatedly to cycle through the 14
preset designer light colors
• Press and hold LIGHT for 5 seconds to toggle the
bin light on or off.
ADJUST CUBE SIZE
The ice cube size is easily adjustable to meet your
usage.
The available cube sizes range from -6 (smallest) to
+6 (largest). The default is 0. Please see fig. 1.
To adjust the cube size, press SIZE until the display
shows the desired setting.
CABINET OPERATION
ADJUST ICE LEVEL
The ice bin level determines how much ice will be in
the storage bin before the ice level sensor considers
full (see fig. 1). The default setting is 100%. the level
adjusts in 5% increments.
To adjust the ice level, press LEVEL until the display
shows the desired setting.
FIG. 1.
Water quality setting range.
ADJUST FOR WATER QUALITY
The water quality setting allows your ice machine to
easily accommodate different levels of water quality /
hardness / scale. The available settings range from 0
(soft water / low scale) to 5 (hard water / high scale).
The default setting is 0. Please see fig. 1.
If you are unsure of your water quality, check your
water with a water quality test kit (not provided
by TRUE).
To adjust for water quality, press both LIGHT and
CLEAN.
0
Soft water/
low scale
5
Hard water/
high scale
1 2 3 4
Loading ...
Loading ...
Loading ...