Loading ...
Loading ...
Loading ...
TRUE RESIDENTIAL
®
TEC_TM_155 REV. A12/07/2021Page 24 of 64
PRIOR TO INSTALLATION
MAXIMUM
VERTICAL RISE
MAX RUN
3/8” I.D. Hose 84” (2,133.6 mm) 100’ (30.84 m)
1/2” I.D. Hose
(provided by TRUE)
48” (1,219.2 mm) 100’ (30.84 m)
Hose larger than 1/2" I.D. may require an external pump.
Vertical rise higher that 84” will require external pump.
INSTALLATION
1. Thread the 1/2” NPT connector into the drain
fitting. See fig. 1.
2. With the clamp on the hose, connect the clear
drain hose to the barbed fitting. See fig. 1.
3. Tighten the hose clamp.
NOTE: VERIFY THE ICE MAKER DRAINS
THROUGH TWO CYCLES WITHOUT ANY DRAIN
ALARM DURING INSTALLATION.
For more information, see “Drain Time Alarm"
(page 38).
FIG. 1.
Be sure to tightly clamp the drain line into the barbed fitting.
Thread sealant recommended.
1
2
48” MAX
(1,219.2 mm)
84” MAX
(2,133.6 mm)
E xternal
Pump
1/2” I.D. Hose
(Provided
by TRUE)
E x t e r n a l
Pump
3/8” I.D. Hose
(Not provided
by TRUE)
Loading ...
Loading ...
Loading ...