Loading ...
Loading ...
Loading ...
13
RQT9961
13
ENGLISH
Clock and Timers
This is a 24-hour clock.
1 Press [SETUP] repeatedly to select “CLOCK”.
2 Press [3, 4] to set the time and then press
[OK].
≥ To check the time, press [SETUP] repeatedly to select
“CLOCK” and then press [OK] once.
(During standby, press [DISPLAY] once.)
≥ The clock is reset when there is a power failure or when the
AC mains lead is removed.
≥ Reset the clock regularly to maintain accuracy.
The sleep timer can turn the unit off after a set time.
Press [SLEEP] to set the time (in minutes).
SLEEP 30 --. SLEEP 60 --. SLEEP 90 --. SLEEP120
^--------------------- OFF (Cancel) (----------------b
≥ To confirm the remaining time, press [SLEEP] once.
≥ The play timer and sleep timer or the record timer and sleep
timer can be used together. The sleep timer is always the
main timer on the unit.
You can set the timer to come on at a certain time to:
– wake you up (play timer)
– record from the external equipment (record timer)
Play timer and record timer cannot be used together.
Preparation
Set the clock.
1 Press [SETUP] repeatedly to select “TIMER
ADJ”.
2 Press [3, 4] to select “FPLAY” or “FREC”
and then press [OK].
3 Press [3, 4] to set the starting time and then
press [OK].
4 Press [3, 4] to set the finishing time and then
press [OK].
5 Press [3, 4] to select the music source
§
you
want to play or record and then press [OK].
Turning the timer on
1 Prepare the selected music source.
2 Press [SETUP] repeatedly to select “TIMER
SET”.
3 Press [3, 4] to select “PLAY ON” or “REC
ON” and then press [OK].
≥ “FPLAY” or “FREC” is selected.
≥ To turn the timer off, press [3, 4] to clear “FPLAY” and
“FREC”, and then press [OK].
4 Press [Í] to turn the unit to standby mode.
(For the timer to operate, the unit must be turned off
before the timer start time.)
To check the setting
1 Press [SETUP] repeatedly to select “TIMER
ADJ”.
2 Press [3, 4] to select “FPLAY” or “FREC”
and then press [OK].
(During standby, press [DISPLAY] twice.)
≥ The play timer starts at a low volume and increases gradually
to the preset level.
≥ The record timer starts 30 seconds before the set time with
the volume muted.
≥ The timer comes on at the set time every day if the timer is
on.
≥ If you switch off the system and switch on again while a timer
is in operation, the timer will not stop at the end time.
Setting the clock
Sleep timer
Play and record timer
Play timer
Prepare the music source you want
to listen to (USB or external
equipment) and set the volume.
Record timer
Connect the USB device to [USB\B]
and prepare the external
equipment.
§ The following can be set as the music source.
For play timer: “AUX 1”, “AUX 2”, “USB A”, “USB B”
For record timer: “AUX 1”, “AUX 2”
SC-CMAX5_GS~RQT9961-G.book 13 ページ ２０１４年８月２２日 金曜日 午後７時８分
Loading ...
Loading ...
Loading ...