Loading ...
Loading ...
Loading ...
Operation(Continued)
WARNING
DONOTattempt any maintenance,adjustments or service
with engine and blade running. STOPengine and blade.
Disconnectspark plug wire and secure away from spark
plug. Engineand components are HOT.Avoid serious
burns, allow sufficient time for all components to cool.
CuttingHeightAdjustment
1. Pull the height adjusting latch (A, Figure8) outward and
move to the desired cutting height.
Figure8:Adjusting cutting height
2. Set all wheels atthe same cutting height. The highest
cutting position is Notch 7 (Figure 9). The lowest
cutting position is Notch 1.
1.25 in 4.00 in
Figure9: Cuttingheight settings (approximate)
RecyclingOperation
Note: Forbest recycling results, cut up to a maximum of 1/3
of grass blade length and recycleONLYwhen grass is dry.
1. Setall wheels in the highest cutting position (Notch 7).
Referto the Sectionentitled "Cutting Height
Adjustment".
2. Move the engine speedcontrol to the fast (Rabbit)
position.
3. Move the ground speed control to the slowest speed
setting.
4. Proceedmowing slowly. If the grass is very dense,
lower each rearwheel latch onenotch lower than the
front wheel latchesto improve recycling performance.
Note:The recycling cover should remain on the machineat
all times, unless alternatedischarge operations are desired,
such asside discharging or bagging.
Removingthe RecyclingCover
1. Removethe knob nuts (A, Figure 10) and internal/
externaltooth lock washers(B) securing the recycling
cover (C) to the mower deck.
2. Removethe cover.
Figure 10. Removingthe recycling cover
m.
WARNING
Stop engineand mower blade by releasingthe blade
control before adjusting cutting height.
Loading ...
Loading ...
Loading ...