Loading ...
Loading ...
Loading ...
Component Replacement
ft Cover.
BELT REPLACEMENT
To remove the belt:
Remove ve Phillips Pan Head Screws (54) from
Chain Cover B (2).
See Diagram 1.
Unscrew both Phillips Pan Head Bolts (56) from
Flywheel Left Cover (72).
Remove Flywheel Left Cover (72).
Remove two Phillips Pan Head Bolts (56) from
Chain Cover A (1).
See Diagram 2.
Using a large screwdriver, insert it underneath Belt
(22).
See Diagram 3.
Raise Belt (22) using the screwdriver with one hand
then rotate the pedal to remove Belt (22) with the
other hand.
Remove Tension Spring (38) by unscrewing Round
Allen Head Bolt (59) while holding Nylon Nut (65).
Remove Round Allen Head Bolt (59), Washer (71),
Washer (70), Nylon Nut (65) and Tension Bracket
(36), from the assembly.
See Diagram 4.
Mark the original position of both Socket Head
Bolts (62) on the left and right side of the ywheel
bracket.
See Diagram 5.
Remove both Socket Head Bolts (62), both Hex
Nuts (52), Spring Washer (44) and both Hex Flange
Nuts (48).
Take o Flywheel (16) and Belt (22).
NOTE: Be careful not to loose Spindle Covers (19) on
both sides of the fl ywheel spindle.
A.
B.
C.
D.
E.
F.
G.
H.
I.
J.
y, then discharge the Belt (22).
Diagram 1
Diagram 2
Diagram 3
Diagram 4
Diagram 5
Loading ...
Loading ...
Loading ...