Loading ...
Loading ...
Loading ...
Component Replacement
REPLACING THE BRAKE KNOB
To replace the brake knob:
Remove Socket Head Bolts (61) and Washers (67)
to disassemble the brake assembly.
See Diagram 1.
While holding Nut (51) with a wrench, loosen Brake
Knob (13) by hand.
See Diagram 2.
Remove Acorn Cap Nut (46), Nut (51), Brake Ad-
justment Nut (30), Rubber Spacer (14), Brake Knob
(13) and Brake Screw (29) one at a time.
Replace Brake Knob (13), then insert Brake Screw
(29) into the new Brake Knob (13) and insert them
into the mainframe.
Replace Rubber Spacer (14), Brake Adjustment Nut
(30), Nut (51) and Acorn Cap Nut (46).
Tighten Nut (51) with a wrench while holding onto
Brake Knob (13) by hand. Make sure Acorn Cap Nut
(46) is properly secured.
Install the brake assembly onto the mainframe us-
ing Socket Head Bolts (61) and Washers (67).
See Diagram 1.
REPLACING THE SEAT
To replace the seat:
Loosen the nuts underneath Seat (7) as shown in
Diagram 3.
NOTE: Do not completely remove the nuts.
Take o the old seat.
Insert a new Seat (7) making sure that the nuts are
loose.
Tighten the nuts underneath Seat (7) as shown in
Diagram 3.
A.
B.
C.
D.
E.
F.
G.
olumn Bolt M5*12L 61 , 2pcs
Diagram 1
Diagram 2
A.
B.
C.
D.
Diagram 3
Loosen Here
Loading ...
Loading ...
Loading ...