Loading ...
Loading ...
Loading ...
Zipper Sewing
_1_Stitch selector: 5
,_2_,Stitch width: 6.5
_3_Stitch length: 2
(4) Needle thread tension: 2 to 6
_5_Presser foot E: Zipper foot
• "bsnap on the zipper foot
_1_Groove
_2)Pin
(3) To sew left side
(4) To sew right side
Fit the pin on the zipper foot into the groove on the foot
holder.
* To sew the left side of the zipper, attach zipper foot on
the right-hand side of pin.
*To sew the right side of zipper, attach the zipper foot on
the left-hand side of pin.
• Fabric preparation
_ Right (top) side of fabric
_ Wrong (bottom) side of fabric
_3)Bottom seam
_4_Zipper bottom stop position
_5_Basting stitch
Place the right (top) sides of the fabric _i_ together. Sew a
bottom seam ,_3_5/8" (2.2 cm) from the right edge to the
estimated zipper bottom stop position _4_.Sew in reverse
a few stitches to lock.
Increase the stitch length to 4, set needle thread tension
to 0, and sew basting stitch _5_.the entire length of the
zipper sewing.
• Tosew
_1_1/8" (0.4cm) fabric margin
_2_Zipper teeth
_3_Zipper tape
[] Attach zipper foot on right-side of pin.
Fold back the upper layer seam allowance. Fold back
the lower layer seam allowance to leave a 1/8" (0.4 cm)
margin of fabric _1_,.
Place zipper teeth next to margin edge and pin margin to
zipper tape.
Align zipper foot with margin edge. Return thread tension
and stitch length to original settings. Sew a seam the
entire length of zipper tape, removing pins as you go.
Before reaching pull-tab, stop the machine with needle in
the fabric and raise the foot, then unzip a few inches to
clear a path for the stitch.
Remove fabric and close zipper.
f
f
f
/
[]
I
I
L4i,
¢ _ WIDTH
0--1 --2--3_4_5_6,5
STRETCH LENGTH
v --0,,_= 1_2__3__4
'i
(5/8")
(2.2cm)
1/8"
(0.4 cm)i
J
-x
J
J
J
42
Loading ...
Loading ...
Loading ...