Loading ...
Loading ...
Loading ...
9
The unit should always be plugged into its own individual electrical outlet which has a voltage rating that
matches the rating label on the appliance. This provides the best performance and also prevents
overloading house wiring circuits that could cause a fire hazard from overheated wires. Never unplug the
unit by pulling on the power cord.
Always grip the plug firmly and pull straight out from the receptacle. Repair or replace immediately
any power cord that has become frayed or otherwise damaged. Do not use a cord that shows
cracks or abrasion damage along its length or at either end. When moving the unit, be careful not to
damage the power cord.
Extension Cord
Do not use an extension cord with this appliance. If the power cord is too short, have a qualified
electrician or service technician install an outlet near the appliance.
Reversing the Door Hinge (MC6BI model)
Follow these steps if you would like to reverse the direction your appliance door opens.
NOTE: You will need a Phillips head screwdriver to reverse the door swing of this unit.
1. Unplug the appliance from the power supply.
2. Remove each of the screws on the top of the unit. There should be a total of seven (three on the
side hinge, four on the unhinged side). Be careful not to lose or discard the screws.
3. Remove the TOP HINGE and WASHER, and set aside.
4. Lift the door straight up and off of the BOTTOM HINGE.
5. Remove the screws fastening the BOTTOM HINGE and COVER to the bottom of the refrigerator
cabinet. There are five screws total, four for the hinge, one for the over.
6. Move the BOTTOM HINGE and COVER each to the opposite side of the bottom of the
refrigerator cabinet. Completely tighten the four BOTTOM HINGE screws, and tighten the
COVER screw gently.
Loading ...
Loading ...
Loading ...