Loading ...
Loading ...
Loading ...
12
OPERATING YOUR APPLIANCE
Temperature Controls
For the MC2 Model:
• Your unit has only one control for regulating the temperature. The temperature control is located on
the upper side of the compartment.
• The first time you turn the unit on, set the temperature control to “MAX”.
• The range of the temperature control is from position "OFF” to “MAX”. After 24 to 48 hours,
adjust the temperature control to the setting that best suits your needs. The setting of
“NORMAL” should be appropriate for most uses.
• To turn the appliance off, turn the temperature control to “OFF”.
For the MC6BI Model:
• The refrigerator’s temperature is preset at the factory for your convenience.
When first installing your refrigerator, be sure that the control is still in the mid-
point setting as shown below:
• The mid-setting indicated in the section above should be ideal for regular use.
• If you need to adjust the temperature, be sure to wait at least 24 hours
between adjustments.
Storage:
For model MC6BI, we recommend not storing breast milk or other sensitive materials on the lower
door shelf or interior floor, as these locations may experience more temperature variation.
For the CP34WMC/CP34BSSMC:
• When you first start your appliance, set the dial to 4 and allow 24 hours to pass before adjusting the
temperature to your needs.
• Your unit had a temperature control dial numbered from 0 to 7. 1 is the warmest setting, and 7 is the
coldest setting. Turning the dial to 0 stops cooling in both the refrigerator and freezer sections.
Defrosting:
The MC2 and MC6BI models defrost automatically.
To defrost the freezer section of the CP34WMC:
1. Remove any stored items, and turn the temperature dial to 0. Defrosting may take a few hours.
To speed the defrosting process, keep the door open.
2. During the defrosting, water will accumulate. Use a towel to wipe off any excess water. Do not
leave your appliance unattended.
3. After defrosting, simply wipe out the interior of the freezer.
4. Reset your appliance to the desired temperature and resume normal use.
NOTE: If the unit is unplugged, has lost power, or is turned off, you must wait three to five
minutes before restarting the unit. If you attempt to restart before this time delay, the
refrigerator will not start.
Loading ...
Loading ...
Loading ...