Loading ...
Loading ...
Loading ...
www.gaslandchef.com
3330-A Marathon Ct Charleston, SC 29418
15
1 (844) 538-7890
• Assemble the burner to the electrode and drip pan:
A. Make sure the burner design is correct. Our current design for the burner
is has the electrode on the left side (10 o’clock) and cross-over on the right
side (2 o’clock). There are four parts for the dual burners. They are burner
cap, flame ring base, flame ring and burner base.
B. Make sure the electrode is going through the hole on the flame ring and it
is vertical to the surface of flame ring base.
C. For the flame ring base part. make sure that the electrode will go through
the hole on the 10 o’clock position. Make sure the electrode is not going
through the hole next to the cross-over.
D. Make sure the electrode is vertical to the surface of the burner base.
Please be notified that there’s a slot at the 8 o’clock position of the burner
base. This slot helps to locate the burner base.
E. Your electrode design might be mounted underneath the drip pan. Make
sure the electrode is vertical to the surface of the burner base. Make sure
the supporting pipe and the burner base are tightened.
Loading ...
Loading ...
Loading ...